Manual Alarm Control Panel
This platform enables you to set manual alarms in Home Assistant.
# Example configuration.yaml entry
alarm_control_panel:
- platform: manual
Configuration variables:
- name (Optional): The name of the alarm. Default is “HA Alarm”.
- code (Optional): If defined, specifies a code to enable or disable the alarm in the frontend.
- pending_time (Optional): The time in seconds of the pending time before arming the alarm. Default is 60 seconds.
- trigger_time (Optional): The time in seconds of the trigger time in which the alarm is firing. Default is 120 seconds.
- disarm_after_trigger (Optional): If true, the alarm will automatically disarm after it has been triggered instead of returning to the previous state.
-
**armed_home armed_away armed_night triggered** (Optional): State specific settings - pending_time: State specific pending time override.
In the config example below, armed_home state will have no pending time and triggered state will have pending time of 20 second whereas armed_away state will have a default pending time of 30 seconds.
# Example configuration.yaml entry
alarm_control_panel:
- platform: manual
name: Home Alarm
code: 1234
pending_time: 30
armed_home:
pending_time: 0
triggered:
pending_time: 20
trigger_time: 4
Examples
In this section, you find some real-life examples of how to use this panel.
Sensors
Using sensors to trigger the alarm.
automation:
- alias: 'Trigger alarm while armed away'
trigger:
- platform: state
entity_id: sensor.pir1
to: 'active'
- platform: state
entity_id: sensor.pir2
to: 'active'
- platform: state
entity_id: sensor.door
to: 'open'
- platform: state
entity_id: sensor.window
to: 'open'
condition:
- condition: state
entity_id: alarm_control_panel.ha_alarm
state: armed_away
action:
service: alarm_control_panel.alarm_trigger
entity_id: alarm_control_panel.ha_alarm