Climate
The climate
component is built for the controlling and monitoring of HVAC (heating, ventilating, and air conditioning) and thermostat devices.
To enable this component, pick one of the platforms, and add it to your configuration.yaml
:
# Example configuration.yaml entry
climate:
platform: demo
Services
Climate control services
Available services: climate.set_aux_heat
, climate.set_away_mode
, climate.set_temperature
, climate.set_humidity
, climate.set_fan_mode
, climate.set_operation_mode
, climate.set_swing_mode
, climate.set_hold_mode
Not all climate services may be available for your platform. Be sure to check the available services Home Assistant has enabled by checking Services.
Service climate.set_aux_heat
Turn auxiliary heater on/off for climate device
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
aux_heat |
no | New value of auxiliary heater. |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_aux_heat
data:
entity_id: climate.kitchen
aux_heat: true
Service climate.set_away_mode
Set away mode for climate device. The away mode changes the target temperature permanently to a temperature reflecting a situation where the climate device is set to save energy. This may be used to emulate a “vacation mode”, for example.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
away_mode |
no | New value of away mode. |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_away_mode
data:
entity_id: climate.kitchen
away_mode: 'on'
Service climate.set_hold_mode
Set hold mode for climate device. The hold mode changes the target temperature of the client device temporarily to a different temperature. Typical hold modes provided by a climate device are “away” or “home”, where the hold temperature is chosen depending on a predefined climate, or “temperature” hold, where a particular temperature is selected as the temporary target temperature. The particular modes available depend on the climate device.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
hold_mode |
no | New value of hold mode. |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_hold_mode
data:
entity_id: climate.kitchen
hold_mode: 'away'
Service climate.set_temperature
Set target temperature of climate device
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
temperature |
no | New target temperature for hvac |
target_temp_high |
yes | New target high temperature for hvac |
target_temp_low |
yes | New target low temperature for hvac |
operation_mode |
yes | Operation mode to set temperature to. This defaults to current_operation mode if not set, or set incorrectly. |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_temperature
data:
entity_id: climate.kitchen
temperature: 24
operation_mode: Heat
Service climate.set_humidity
Set target humidity of climate device
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
humidity |
no | New target humidity for climate device |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_humidity
data:
entity_id: climate.kitchen
humidity: 60
Service climate.set_fan_mode
Set fan operation for climate device
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
fan_mode |
no | New value of fan mode |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_fan_mode
data:
entity_id: climate.kitchen
fan_mode: 'On Low'
Service climate.set_operation_mode
Set operation mode for climate device
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
operation_mode |
no | New value of operation mode |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_operation_mode
data:
entity_id: climate.kitchen
operation_mode: Heat
Service climate.set_swing_mode
Set operation mode for climate device
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | String or list of strings that point at entity_id ’s of climate devices to control. Else targets all. |
swing_mode |
no | New value of swing mode |
Automation example
automation:
trigger:
platform: time
at: "07:15:00"
action:
- service: climate.set_swing_mode
data:
entity_id: climate.kitchen
swing_mode: 1
Customization
The step for the setpoint can be adjusted (default to 0,5 increments) by adding the following line into configuration
’'’yaml customize:
- entity_id target_temp_step: 1 ‘’’