Z-Wave
To enable Z-Wave, plug your Z-Wave USB stick into your Raspberry Pi 3 and add the following to your configuration.yaml
:
zwave:
usb_path: /dev/ttyACM0
If you need GPIO on raspberry-pi3 for you Z-Wave module add follow line into config.txt
:
dtoverlay=pi3-miniuart-bt
For some exceptional devices, the /dev/ttyAMA0
will not be detected by udev and are therefor not mapped with docker.
So you need explicit set this device for mapping to Home-Assistant. Execute this command on ssh add-on:
$ curl -d '{"devices": ["ttyAMA0"]}' http://hassio/homeassistant/options
After that, you need change usb_path
to /dev/ttyAMA0
.
HUSBZB-1:
zwave:
usb_path: /dev/ttyUSB0
zha:
usb_path: /dev/ttyUSB1
database_path: /config/zigbee.db