DTE Energy Bridge

A sensor platform for the DTE Energy Bridge. To find out which version of the DTE Energy Bridge sensor you have, find the status LED on your box.

• If the status LED is on the top, you have a v1.
• If the status LED is on the front, you have a v2.

To enable this sensor, add the following lines to your configuration.yaml file:

# Example configuration.yaml entry
sensor:
  - platform: dte_energy_bridge
    ip: 192.168.1.11

Configuration variables:

• ip (Required): The IP address of your bridge.
• name (Optional): Name to use in the frontend.
• version (Optional): Hardware version of the sensor. Defaults to 1.