Home Assistant 中文网

Sonos

The sonos platform allows you to control your Sonos HiFi wireless speakers and audio components from Home Assistant. By default it supports auto-discovery provided by Home Assistant, and you don’t need to add anything to your configuration.yaml. Alternatively, there are some manual configuration options, listed as follows:

To add your Sonos components to your installation, add the following to your configuration.yaml file. It will perform Sonos auto-discovery of your connected speakers.

# Example configuration.yaml entry using Sonos discovery
media_player:
  - platform: sonos

If you have multiple network devices, you can provide the IP address of the device that should be used for Sonos auto-discovery.

# Example configuration.yaml entry using Sonos discovery on a specific interface
media_player:
  - platform: sonos
    interface_addr: 192.0.2.1

You can also specify one or more hosts to connect to if they cannot be found with Sonos auto-discovery.

# Example configuration.yaml entry with manually specified addresses
media_player:
  - platform: sonos
    hosts: 192.0.2.25

or, for multiple hosts:

# Example configuration.yaml entry with manually specified addresses
media_player:
  - platform: sonos
    hosts:
      - 192.0.2.25
      - 192.0.2.26
      - 192.0.2.27

Service sonos_snapshot

Take a snapshot of what is currently playing on one or more speakers. This service, and the following one, are useful if you want to play a doorbell or notification sound and resume playback afterwards. If no entity_id is provided, all speakers are snapshotted.

Service data attribute Optional Description
entity_id yes String or list of strings that point at entity_ids of coordinator speakers.
with_group yes Should be also snapshot the group state of the speaker.

Service sonos_restore

Restore a previously taken snapshot of one or more speakers. If no entity_id is provided, all speakers are restored.

Service data attribute Optional Description
entity_id yes String or list of strings that point at entity_ids of coordinator speakers.
with_group yes Should be also restore the group state of the speaker. Only if was snapshot with group.

Service sonos_join

Do group players together under a single coordinator. That will make a new group or join to exists group.

Service data attribute Optional Description
master no A single entity_id that will become/hold the coordinator speaker.
entity_id no String or list of a single entity_id that will group to master speaker.

Service sonos_unjoin

Remove one or more speakers from a group of speakers. If no entity_id is provided, all speakers are unjoined.

Service data attribute Optional Description
entity_id no String or list of entity_ids that will be separated from their coordinator speaker.

Service sonos_set_sleep_timer

Sets a timer that will turn off a speaker by tapering the volume down to 0 after a certain amount of time. Protip: If you set the sleep_time value to 0, then the speaker will immediately start tapering the volume down.

Service data attribute Optional Description
entity_id no String or list of entity_ids that will have their timers set. Must be a coordinator speaker.
sleep_time no Integer number of seconds that the speaker should wait until it starts tapering. Cannot exceed 86399 (one day).

Service sonos_clear_sleep_timer

Clear the sleep timer on a speaker, if one is set.

Service data attribute Optional Description
entity_id no String or list of entity_ids that will have their timers cleared. Must be a coordinator speaker.

Service sonos_update_alarm

Update an existing sonos alarm.

Service data attribute Optional Description
entity_id no String or list of entity_ids that will have their timers cleared. Must be a coordinator speaker.
alarm_id no Integer that is used in Sonos to refer to your alarm.
time yes Time to set the alarm.
volume yes Float for volume level.
enabled yes Boolean for whether or not to enable this alarm.
include_linked_zones yes Boolean that defines if the alarm also plays on grouped players.