DSMR/Slimme meter

A sensor platform for Dutch Smart Meters which comply to DSMR (Dutch Smart Meter Requirements), also known as ‘Slimme meter’ or ‘P1 poort’.

Currently support DSMR V2.2 and V4 through the dsmr_parser module by Nigel Dokter.

For official information about DSMR refer to: DSMR Document

For unofficial hardware connection examples refer to: Domoticx

This component is known to work for:

• Iskra ME382 / MT382 (DSMR 2.2)
• Landis+Gyr E350 (DMSR 4)
• Landis+Gyr ZCF110 / ZM F110 (DSMR 4.2)
• Kaifa E0026
• Kamstrup 382JxC (DSMR 2.2)

,USB serial converters:

• Cheap (Banggood/ebay) Generic PL2303
• https://sites.google.com/site/nta8130p1smartmeter/webshop
• https://www.sossolutions.nl/slimme-meter-kabel

And Serial to network proxies:

• ser2net - http://ser2net.sourceforge.net/

# Example configuration.yaml entry
sensor:
  - platform: dsmr

Configuration variables:

• port string (Optional): Serial port to which Smartmeter is connected (default: /dev/ttyUSB0 (connected to USB port)). For remote (i.e. ser2net) connections, use TCP port number to connect to (i.e. 2001).
• host string (Optional): Host to which Smartmeter is connected (default: ‘’ (connected via serial or USB, see port)). For remote connections, use IP address of host to connect to (i.e. 192.168.1.13).
• dsmr_version string (Optional): Version of DSMR used by meter, choices: 2.2, 4 (default: 2.2).

Full configuration examples can be found below:

# Example configuration.yaml entry for USB/serial connected Smartmeter
sensor:
  - platform: dsmr
    port: /dev/ttyUSB1
    dsmr_version: 4

group:
  meter_readings:
    name: Meter readings
    entities:
      - sensor.power_consumption_low
      - sensor.power_consumption_normal
      - sensor.power_production_low
      - sensor.power_production_normal
      - sensor.gas_consumption

# Example configuration.yaml entry for remote (TCP/IP, i.e. via ser2net) connection to host which is connected to Smartmeter
sensor:
  - platform: dsmr
    host: 192.168.1.13
    port: 2001
    dsmr_version: 4

group:
  meter_readings:
    name: Meter readings
    entities:
      - sensor.power_consumption_low
      - sensor.power_consumption_normal
      - sensor.power_production_low
      - sensor.power_production_normal
      - sensor.gas_consumption

Optional configuration example for ser2net:

# Example /etc/ser2net.conf for proxying USB/serial connections to DSMRv4 smart meters
2001:raw:600:/dev/ttyUSB0:115200 NONE 1STOPBIT 8DATABITS XONXOFF LOCAL -RTSCTS

HASSbian users have to give dialout permission to the user homeassistant:

$ sudo usermod -a -G dialout homeassistant

and after that you need to reboot!

$ sudo reboot