KNX Sensor

The knx sensor platform allows you to monitor KNX sensors.

The knx component must be configured correctly, see KNX Component.

To use your KNX sensor in your installation, add the following lines to your configuration.yaml file:

# Example configuration.yaml entry
sensor:
  - platform: knx
    name: Heating.Valve1
    address: '2/0/0'
    type: 'percent'

  - platform: knx
    name: Kitchen.Temperature
    address: '6/2/1'
    type: 'temperature'

  - platform: knx
    name: Wind speed
    type: speed_ms
    address: 1/0/0

  - platform: knx
    name: Lux
    type: illuminance
    address: 1/0/1

• name (Optional): A name for this device used within Home Assistant.
• address: KNX group address of the sensor
• type: (Optional) “percent”, “temperature”, “illuminance”, “speed_ms”, “current”