myStrom Switch


The mystrom switch platform allows you to control the state of your myStrom switches. The built-in sensor is measuring the power consumption while the switch is on.

To use your myStrom switch in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
switch:
  - platform: mystrom
    host: IP_ADRRESS

Configuration variables:

  • host (Required): The IP address of your myStrom switch, eg. http://192.168.1.32.
  • name (Optional): The name to use when displaying this switch.

Check if you are able to access the device located at http://IP_ADRRESS. The details about your switch is provided as a JSON response.

$ curl -X GET -H "Content-Type: application/json" http://IP_ADDRESS/report
{
	"power":	0,
	"relay":	false
}

or change its state:

$ curl -G -X GET http://IP_ADDRESS/relay -d 'state=1'