NAD tcp

The nadtcp platform allows you to control the D7050 and C338 from Home Assistant via WiFi. Note that it has only been tested with the D 7050.

To add a NAD amplifier to your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
media_player:
    platform: nadtcp
    host: 192.168.0.112

Configuration variables:

• host (Required): The IP address of your amplifier.
• name (Optional): Name of the device. Default is NAD amplifier.
• min_volume (optional): Minimum volume in dB to use with the slider. Default is -60
• max_volume (optional): Maximum volume in dB to use with the slider. Default is -10
• volume_step (Optional): The amount in dB you want to increase the volume with when pressing volume up/down. Default is 4 dB.

The maximum volume level of the D 7050 amplifier is +10 db, minimum is -90.