Python Remote API
See the developer documentation for a full overview of the documentation. The rest of this page will contain examples on how to use it.
In the package homeassistant.remote
a Python API on top of the HTTP API can be found.
A simple way to get all current entities is to visit the “Set State” page in the “Developer Tools”. For the examples below just choose one from the available entries. Here the sensor sensor.office_temperature
and the switch switch.livingroom_pin_2
are used.
First import the module and setup the basics:
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'password')
print(remote.validate_api(api))
Get configuration
Get the current configuration of a Home Assistant instance:
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'password')
print(remote.get_config(api))
Get details about services, events, and entitites
The output from this is similar to the output you’d find via the frontend, using the DevTools console.
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'YOUR_PASSWORD')
print('-- Available services:')
services = remote.get_services(api)
for service in services:
print(service['services'])
print('\n-- Available events:')
events = remote.get_event_listeners(api)
for event in events:
print(event)
print('\n-- Available entities:')
entities = remote.get_states(api)
for entity in entities:
print(entity)
Get the state of an entity
To get the details of a single entity, use get_state
:
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'YOUR_PASSWORD')
office_temperature = remote.get_state(api, 'sensor.office_temperature')
print('{} is {} {}.'.format(office_temperature.name,
office_temperature.state,
office_temperature.attributes['unit_of_measurement']
)
)
This outputs the details which are stored for this entity, ie:
Office Temperature is 19 °C.
Switches work the same way. The only difference is that both entities have different attributes.
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'YOUR_PASSWORD')
switch_livingroom = remote.get_state(api, 'switch.livingroom_pin_2')
print('{} is {}.'.format(switch_livingroom.name,
switch_livingroom.state
)
)
Set the state of an entity
Of course, it’s possible to set the state as well:
import homeassistant.remote as remote
from homeassistant.const import STATE_ON
api = remote.API('127.0.0.1', 'YOUR_PASSWORD')
remote.set_state(api, 'sensor.office_temperature', new_state=123)
remote.set_state(api, 'switch.livingroom_pin_2', new_state=STATE_ON)
The state will be set to the new values until the next update occurs.
Blinking all entities of a domain
If you want to turn on all entities of a domain, retrieve the service via get_services
and act on that:
import time
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'YOUR_PASSWORD')
domain = 'switch'
remote.call_service(api, domain, 'turn_on')
time.sleep(10)
remote.call_service(api, domain, 'turn_off')
Control a single entity
To turn on or off a single switch, pass the ID of the entity:
import time
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'YOUR_PASSWORD')
domain = 'switch'
switch_name = 'switch.livingroom_pin_2'
remote.call_service(api, domain, 'turn_on', {'entity_id': '{}'.format(switch_name)})
time.sleep(5)
remote.call_service(api, domain, 'turn_off', {'entity_id': '{}'.format(switch_name)})
Specify a timeout
The default timeout for an API call with call_service
is 5 seconds. Services
taking longer than this to return will raise
homeassistant.exceptions.HomeAssistantError: Timeout
, unless provided with a
longer timeout.
import homeassistant.remote as remote
api = remote.API('host', 'password')
domain = 'switch'
# Assuming switch.timeout_switch takes 10 seconds to return
switch_name = 'switch.timeout_switch'
# Raises homeassistant.exceptions.HomeAssistantError: Timeout when talking to
remote.call_service(api, domain, 'turn_on', {'entity_id': switch_name})
# Runs withous exception
remote.call_service(api, domain, 'turn_on', {'entity_id': switch_name},
timeout=11)
Send a notification
The example uses the Jabber notification platform to send a single message to the given recipient in the configuration.yaml
file:
import homeassistant.remote as remote
api = remote.API('127.0.0.1', 'YOUR_PASSWORD')
domain = 'notify'
data = {"title":"Test", "message":"A simple test message from HA."}
remote.call_service(api, domain, 'jabber', data)